Standard ECMA-298
Broadband Private Integrated Services
Network (B-PISN) - Inter-Exchange Signalling Protocol - Separated
Bearer Control (SBC) (B-QSIG-SBC)
(December 1999)
This Standard defines the signalling protocol for the purpose of bearer control at the Q-reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Broadband Private Integrated Services Network (B-PISN) employing Asynchronous Transfer Mode (ATM). This Standard is part of the B-QSIG signalling system.
This Standard specifies the essential features, procedures, and messages required for establishing, maintaining and clearing of bearer connections to point-to-point multiconnection calls at the B-QSIG interface in a functionally separated call and bearer control environment. Bearers are controlled independently by means of a separated call control protocol. The separated call control protocol is assumed to be that specified in
ECMA-294.
This Standard is applicable to PINXs that support separated call and bearer control protocol at the Q reference point. The Q reference point is defined in
ISO/IEC 11579-1 
.
The protocol defined in this Standard forms part of the B-QSIG protocol.
The following file can be freely downloaded:
| File name |
Size (Bytes) |
Content |
| ECMA-298.pdf |
114 095 |
Acrobat (r) PDF file |
Back
Standards
